Nickel Alloy 600

UNS: N06600 | W. Nr: 2.4816 | EN: NiCr15Fe

Alliage de Nickel 600
Nickel Alloy 600

Nickel Alloy 600, also known as Inconel® 600, is a solid‑solution strengthened nickel‑chromium‑iron alloy engineered for environments where conventional stainless steels cannot perform. Built to withstand extreme temperatures, corrosive media, and thermal shock, Alloy 600 delivers stability and durability from cryogenic conditions up to 2000°F (1093°C).

Key Features

  • Excellent High‑Temperature Performance: Performs reliably from cryogenic to 2000°F (1093°C) in oxidizing and reducing environments. Resists oxidation and scaling at elevated temperatures, maintaining structural stability.
  • Exceptional Corrosion Resistance: High nickel content (≥72%) ensures strong resistance to chloride‑induced stress‑corrosion cracking. Chromium improves resistance to oxidizing environments and sulfur‑bearing atmospheres. Suitable for strong magnesium‑chloride solutions where few materials are viable.
  • Strong Mechanical Properties: High tensile and yield strength supported by a stable austenitic structure. Retains ductility under both cryogenic and high‑temperature conditions.
  • Excellent Fabrication Characteristics: Offers good weldability using standard processes such as SMAW, TIG, and MIG, can be hot or cold formed following typical stainless‑steel practices, and is slightly more machinable than 304 stainless steels, though it requires heavy‑duty equipment for optimal results.

Industries and Applications

  • Chemical Processing: Heaters, condensers, evaporator tubes, bubble towers, and equipment in caustic or chloride‑rich solutions
  • Heat Treating Industry: Retorts, muffles, furnace trays, and high‑temperature furnace components
  • Aerospace: Turbine seals, exhaust liners, and high‑temperature structural parts
  • Nuclear Power: Components exposed to high‑purity water; widely used in reactor systems

Chemical composition (%)

CMnSSiCrNi+CoFeCu
0.500.250.0020.2015.5Balance8.000.10

Mechanical properties

Room temperature mechanical properties in the annealed condition

Yield Strength 0.2% offsetUltimate Tensile StrengthElongation
psiMPapsiMPa% to 2″ (51 mm)
37,00025593,00064045

Elastic modulus, modulus of rigidity and poisson’s ratio

TemperatureElastic modulus (E)Modulus of Rigidity (G)Poisson’s Ratio
°F°CpsiGPapsiGPaμ
70213020711760.29

Impact resistance

Alloy 600 shows excellent toughness even at subzero temperatures. The following are typical results for standard size Charpy V-Notch impact specimens machined from plate.

TemperatureCharpy Impact Strength, ft-lb (Joules)
°F°CAnnealsAs RolledCold Rolled
-100-73180244180244––
7021180244180244155156
1,000538180217180217––

Creep & stress rupture properties

Typical stress rupture properties of Alloy 600 are presented below in comparison to some other materials. The data indicate that Alloy 600 has modest load carrying ability in the temperature range in which creep and stress rupture are design criteria.

TemperatureStress, psi (MPa) to produce rupture in
°F°C10 hr100 hr1,000 hr
1,00054074,000 (510)50,000 (345)34,000 (234)
1,200650–23,000 (159)16,000 (110)
1,35073020,000 (138)13,500 (93)9,200 (63)

Corrosion resistance

The high nickel content of Alloy 600 provides good resistance to moderate levels of reducing conditions. The nickel content of the alloy renders the alloy extremely resistant to chloride-ion stress-corrosion cracking. Alloy 600 is one alloy used in solutions of magnesium chloride.

Similarly, the chromium content of Alloy 600 is an improvement over Alloy 200 (commercially pure nickel). In strong oxidizing solutions, like hot, concentrated nitric acid, Alloy 600 has poor resistance.

Alloy 600 is relatively unattacked by the majority of neutral and alkaline salt solutions. It is used in some caustic environments. Alloy 600 resists steam and mixtures of steam, air, and carbon dioxide. The alloy has excellent oxidation resistance to about 2,100°F (1,149°C). The Nickel content of the alloy renders it subject to attack at elevated temperatures in sulfur-containing atmospheres, however.

JACQUET supplies Alloy 600 plates in stock, cut to your exact dimensions with fast delivery. Request a quote today or contact us for availability.
You can also easily compare the cutting tolerances of plasma, laser, waterjet and saw methods to see which one offers the best precision.

Available Forms

Copyright © JACQUET Montréal -
Legal notice